Fill Dirt in Grantsville, UT

Typical market pricing for clean fill-dirt in the Grantsville area is roughly $10 to $25 per ton, depending on quality, moisture content, and local supply. Factors that raise cost include screening, removal of organics, short lead times, and long haul distances. Check your zip code on our site or contact sales for an exact, up-to-date quote.

Hello Gravel partners with local Tooele County and West Utah suppliers to deliver fill-dirt to Grantsville; availability depends on your zip code. Common policies are a 3-ton minimum order (our platform minimum) and delivery by tri-axle dump truck; some suppliers waive delivery fees within a local radius while longer hauls incur a charge. Use our checkout to see supplier options, delivery fees, and available dates for your address.

Grantsville experiences cold winters with freeze-thaw cycles that can heave poorly drained or organic-rich fills. Local soils often include silty and clayey components that retain water, so chosen fill should drain well and be free of organic matter for structural fills. Proper compaction in thin lifts (6 to 8 inches) and selecting a granular, well-graded fill reduce freeze-thaw movement and improve long-term stability.

For structural work such as building pads, foundations, or significant lot fills, Grantsville and Tooele County commonly require permits and compaction testing as part of the building permit process. Simple yard grading or small landscaping fills often do not need a permit, but rules vary by project size and location. Always check with Grantsville City Building Department before placing structural fill so you can meet local permit and testing requirements.

Ask for clean, well-graded fill that is free of organic material and large debris; a common spec is '3-inch minus' or 'well-graded fill' with most particles under 3 inches. For driveways, a compactible granular base with some fines is acceptable; for structural building pads, require engineered or inspected fill and target low organics and consistent gradation. Make sure your contractor or the building inspector confirms the spec and compaction target before delivery.

Labor and equipment costs vary with job size, access, and site prep; expect small residential spreads to run about $8 to $25 per cubic yard for placement and compaction, or roughly $50 to $120 per hour for excavator or skid-steer plus operator. Larger contractor jobs are often bid per cubic yard and may be cheaper on a per-yard basis. Get local labor quotes and compare them with the delivered material cost to budget accurately.

Most deliveries to Grantsville arrive by tri-axle dump truck, which commonly carries about 10 to 16 tons of fill-dirt depending on material density and local weight limits. Some suppliers also use end-dumps or transfer trucks for larger loads. Deliveries usually come from local suppliers within a 30 to 75 mile radius; longer hauls or remote sites can add fuel and mileage charges, which will show on your quote.

The best time to order fill-dirt in Grantsville is spring through fall when the ground is not frozen and trucks have reliable access. Winter deliveries can be delayed by frozen ground, snow, or limited winter hauling, and very wet spring periods can make sites muddy and harder to compact. If you need fast delivery, check our next-day option (orders placed before noon CST) but expect seasonal constraints and possible extra fees.

Clear the drop area of debris, mark property lines and underground utilities, and provide at least 12 to 14 feet of clear width for a tri-axle truck to safely access the site. If you want tailgate spreading, request it at checkout and know the driver will assess feasibility on arrival; otherwise plan for equipment to spread and compact the material in lifts. Tell your supplier if access is uphill, on loose or muddy ground, or past narrow gates so they can plan the right truck and equipment.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.