Stone in Riverside, KS

Delivered price for stone in Riverside varies by stone type, order size, and delivery distance. Expect a rough range of $25 to $70 per ton delivered for common crushed stone types; Hello Gravel minimum order is 3 tons and final pricing is shown at checkout for your zip code. For an exact price, use our online quote or contact our team with your delivery address and desired stone type.

For Riverside driveways we recommend angular crushed stone (commonly 3/4" crushed or crusher run) because it compacts well and sheds water. Start with a compacted base of crusher run or 3/4" minus and finish with a wearing course of 3/4" clean stone if you want a neater surface. Local suppliers in Kansas often carry limestone-based crushed stone that performs well in our freeze-thaw cycles.

A typical two-car driveway (about 18 to 20 ft wide by 30 to 40 ft long) will need roughly 4 to 10 tons depending on depth: 3 inches of coverage needs about 3 to 5 tons, 4 inches needs about 4 to 7 tons, and a 6-inch base needs 6 to 10 tons. Use the square footage times depth to estimate and remember Hello Gravel has a 3-ton minimum order. If you want, we can calculate quantities for your exact driveway dimensions.

Yes, properly installed crushed stone holds up well in Riverside's cold winters because it drains and does not retain water like fines-heavy mixes. To reduce frost heave, use an adequate base layer, good drainage, and avoid rounded river rock which shifts more in freeze-thaw conditions. Regional stone from Kansas suppliers typically performs well when installed with standard best practices.

Professional installation in Riverside depends on site prep, access, and required depth, but expect projects to range from a few hundred dollars for small patches to $1,000 to $3,500 or more for a full driveway including grading and base prep. Many contractors price by square foot or by the hour and may add per-ton fees for spreading and compacting. Get local quotes and include Hello Gravel delivery details so contractors can price labor correctly.

Crushed limestone is a common and practical choice in Kansas because it compacts well and often costs less when sourced locally, making it good for driveways and paths. If you want decorative color or a non-binding surface, other crushed stone types (granite, trap rock) can be used for landscape beds and accents. Consider function first: use limestone for base and hardworking surfaces, and choose decorative stone for appearance.

Yes, stone can form the basis of a permeable driveway if you use clean, uniformly graded stone (no fines), a well-graded subbase, and proper edge restraints to keep material in place. Permeable designs also need good underlying drainage and possibly a geotextile; site slope and soil permeability in Riverside will affect performance. Check local codes and consult a contractor for a design sized to your site's infiltration rate.

Stone driveways and paths usually need topping or spot repairs every 2 to 7 years depending on traffic, climate exposure, and how well the base was prepared. In Riverside, heavy winter freeze-thaw, poor drainage, or frequent vehicle use can increase how often you add material. Regular maintenance like grading and adding a few inches every few years will keep the surface stable and attractive.

Many Riverside contractors do recommend geotextile fabric and edging because fabric helps separate subgrade from stone and edging keeps material contained, improving longevity. Geotextile typically costs around $0.20 to $0.50 per square foot material-only, while edging runs about $5 to $15 per linear foot depending on material and installation. Exact costs depend on driveway size and the edging material you choose, so get a local estimate.

Spreading and compacting costs vary by access, job size, and equipment needed, but a common range in the region is about $8 to $25 per ton for labor and compaction services. Small jobs or difficult access can push costs higher, while larger, straightforward jobs lower the per-ton rate. Ask contractors for an itemized quote that separates material delivered by Hello Gravel from installation charges so you can compare options.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.