Fill Dirt in Austin, AR

Yes, fill-dirt is typically less expensive per ton than decorative gravel in the Austin area because it is often sourced as subsoil rather than quarried stone. Prices vary by supplier and hauling distance in West Arkansas, so check Hello Gravel for a local quote and remember our minimum order is 3 tons.

Most tri-axle dump trucks used by our suppliers deliver about 10 to 12 cubic yards, which for fill-dirt usually weighs roughly 12 to 18 tons depending on moisture and soil type. If your access is limited, let us know at checkout so the supplier can advise on truck size and placement.

Fill-dirt is soil and subsoil used to raise grade or fill holes and generally contains fines and clay; gravel is crushed rock used for drainage and surface stability. Use fill-dirt to build up low spots or grade toward drains, and use gravel where you need drainage or a surfaced area like a driveway.

Costs fluctuate with local supply, truck distance, and seasonal demand, so one ton can vary significantly in West Arkansas. For a precise price, enter your zip code at Hello Gravel or contact our sales team for a current per-ton quote and delivery estimate.

Coverage depends on the depth you need. As a rough guide, one ton of fill-dirt is approximately 0.7 to 0.8 cubic yards and will cover about 80 square feet at 3 inches deep or about 240 square feet at 1 inch deep, but actual coverage varies with moisture and compaction.

Yes, most structural or long-term fills should be compacted in layers to reduce settling and provide stability, especially since West Arkansas soils can include clay that changes with moisture. For driveways, pads, or near structures, hire a pro or rent compaction equipment and follow local building requirements.

You can place gravel over fill-dirt, but it works best if the fill is well compacted and a proper base (geotextile or crushed stone) is used to prevent future settling and washout. If the fill is loose or contains organic material, expect movement and unevenness over time.

No, 2 inches of gravel is usually not enough for a driveway on top of fill-dirt. A better approach is to compact 4 to 6 inches of fill or base material, then add a 2 to 3 inch wearing layer of compacted gravel for a light-use driveway; heavier use needs deeper base and proper compaction.

The most affordable options are local suppliers or contractors with surplus native subsoil, and municipal or construction clean-fill programs when available. Hello Gravel sources regionally to keep haul costs low—get a quote to compare local pricing and factor in delivery rather than just per-ton price.

Yes for small jobs, homeowners can do it themselves, but expect to rent or borrow equipment (wheelbarrow, compactors, skid steer) and allow time for layering and compaction. Always call 811 to locate utilities, check local permit requirements, and consider hiring a pro for larger or load-bearing fills.

'Poor man's concrete' usually refers to compacted gravel or crushed rock mixed with fines to make a stable base—it's not a substitute for actual concrete for structural work. It can work as a simple drive or pad over compacted fill-dirt, but it won't provide the load-bearing or longevity of poured concrete where required by code.

Calculate the area and desired depth: for example, a 20 ft by 10 ft driveway at 6 inches deep equals 100 cubic feet, or about 3.7 cubic yards. Convert cubic yards to tons using local density (ask Hello Gravel for an exact conversion for your area) and remember our 3-ton minimum—request a quote and delivery option in checkout.

For most yard grading and low-fill needs in Austin, order clean native fill or screened fill-dirt that is low in organic material and debris. If you need better drainage or a structural base near foundations, request more specific material (engineered fill or compactable subsoil) and note the purpose in Order Notes so the supplier can match the right product.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.