Fill Dirt in Springdale, AR

Delivered fill-dirt prices in Springdale commonly vary based on source, distance, and moisture content; a typical range is about $15 to $40 per ton delivered, though local quotes may be lower or higher. Hello Gravel requires a 3-ton minimum and shows exact pricing and any delivery fees at checkout, so get a quote for the most accurate cost.

A good rule of thumb is about 1.1 to 1.3 tons per cubic yard for loose fill-dirt; use 1.2 tons/yd3 as a simple estimate. To calculate: volume (cu yd) = area (sq ft) x depth (ft) / 27, then multiply cubic yards by 1.2 to get tons (example: 1,000 sq ft raised 3 inches = 1,000 x 0.25 / 27 = 9.26 cu yd ≈ 11.1 tons).

Fill-dirt is suitable for bulk grading and raising yard elevations, but it is not always the best choice for structural foundation backfill or driveway bases. In Springdale's clayey areas you should use engineered or granular backfill (crushed stone or crusher run) and proper compaction near foundations to reduce settling and drainage issues.

Springdale and West Arkansas are humid with relatively heavy rainfall and clay-rich native soils; those clay soils hold water and can cause slow drainage and greater settlement if not properly prepared. To improve performance, compact fill in layers, slope the site for runoff, and consider a gravel subbase or geotextile where drainage and stability are important.

Hello Gravel connects you to local suppliers and haulers serving Springdale and nearby Northwest Arkansas; many local vendors supply common fill-dirt by the ton or cubic yard. Minimums often start at our 3-ton platform minimum, standard delivery is 2+ business days, next-day is available before noon CST for an extra fee, and delivery fees or trip charges depend on distance and site access.

Hire a pro for driveways, structural pads, or any job where compaction and proper grade are critical; small yard raises can be DIY if you have a compacting plate and grading skills. Typical equipment and operator rates in the region run roughly $75 to $150 per hour for a skid steer or mini-excavator plus compaction, or contractors may charge $10 to $30 per cubic yard for spreading and compaction depending on scope.

Properly placed and compacted fill-dirt can be stable for many years, but expect most settlement to occur during the first year; you may need to top up low spots and regrade occasionally. For driveways, use a durable surface layer (crusher run or crushed stone) over compacted fill to reduce maintenance and prolong lifespan.

Fill-dirt is intended to build bulk elevation and fill voids; it often has fines and minimal organic material. Crushed limestone and crusher run provide a stable, compactable base for driveways and pads, while topsoil is for planting; choose crushed stone for structural work, fill-dirt for mass fill, and topsoil for gardens and lawns.

Small residential fills usually do not require a permit, but significant grading, changes to drainage, or moving large volumes of material can trigger local permits or stormwater review. Always check with Springdale Planning and Development or Washington County before large fills to confirm thresholds and any erosion control or inspection requirements.

Some local suppliers and contractors offer spreading, grading, and compaction for an extra fee; Hello Gravel allows you to request tailgate spreading at checkout but drivers perform it at their discretion. Full spreading and compaction are often billed separately—expect either an hourly equipment rate (roughly $80 to $150 per hour) or a project charge typically in the low hundreds depending on access, quantity, and complexity.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.