Fill Dirt in Douglas, AZ

Typical delivered prices for fill-dirt in the Douglas area usually fall in a range rather than a fixed number because suppliers, haul distance, and material quality vary. Expect a rough delivered range of about $12 to $45 per ton, or about $15 to $60 per cubic yard using a common local conversion (see below). Small-load fees may apply for orders under the supplier minimum; Hello Gravel has a 3-ton minimum, and small-load fees in this region commonly range from about $25 to $75. For an exact price, enter your zip code on Hello Gravel to get local supplier rates and any small-load charges.

Standard delivery is typically 2 or more business days after order confirmation, with next-day delivery available for orders placed before noon CST for an additional fee. Hello Gravel’s minimum order is 3 tons, though some local suppliers may accept smaller loads with a small-load fee. Delivery lead time can be longer during high season, so confirm your preferred date at checkout and contact customer service if you need a specific delivery window.

For bulk raising and grading, choose screened, low-organic fill-dirt that compacts well and has a mix of fines and small granular material. For driveways or structural pads, don’t use only loose fill-dirt on the surface; top the compacted fill with 4 to 6 inches of crusher run or a gravel base (3/4" minus) for strength and drainage. In Douglas’ dry climate, avoid high-organic or high-clay mixes that shrink and crack; suppliers can usually note if the material is screened or low-organic.

Calculate volume by multiplying area by depth: 1,000 sq ft x 0.5 ft = 500 cubic feet, which is 18.5 cubic yards. Using a common local conversion of about 1 cubic yard ≈ 1.3 tons for compactable fill-dirt, that equals roughly 24 tons. Always add 10-15% extra for compaction and uneven settling, and check Hello Gravel minimums when ordering.

Local rates vary by crew size and experience, but expect spreading and compacting labor in Douglas to range roughly $40 to $75 per hour for a small crew. Some contractors price by area, commonly about $0.30 to $0.90 per square foot for grading and light compaction, or $0.50 to $1.50 per square foot for heavier work including mechanical compaction. Get written estimates that specify compaction method, equipment, and whether materials handling or site cleanup are included.

In Douglas’ arid climate, fill-dirt can settle and become dusty if not properly compacted and moisture-conditioned during installation. Proper compaction in thin lifts and occasional moistening helps achieve required density; if placed too dry, it will not compact well and may settle later. Drainage is also important—poor drainage can cause erosion during seasonal storms, so grade and swales should be planned before delivery.

Use fill-dirt for bulk raising and building up grade, but not as the structural wearing surface for driveways. For driveway bases, crusher run (3/4" minus) or a graded sand/gravel base compacted in lifts provides strength, drainage, and durability; finish with a wearing layer appropriate to your use. If you are regrading a yard or raising low spots, start with compacted fill-dirt and then install a proper base material for paths or drive surfaces.

Permit rules and testing requirements vary by project size and location; Douglas city or Cochise County may require grading permits for large fills, changes to drainage, or work near property lines. Compaction tests (standard proctor and/or field density tests) are commonly required for work supporting structures, driveways, or when a permit specifies engineered fill. Check with the City of Douglas Public Works or county building department before ordering to confirm local rules and any documentation you will need.

Remove vegetation and organic topsoil from the work area, proof-roll existing soil, and address any soft spots before placing fill. Place fill-dirt in 4 to 6 inch lifts, moisture-condition each lift as needed, and mechanically compact to the density specified by your engineer or local code. Use geotextile fabric over soft subgrades, design drainage swales away from foundations, and install erosion control measures like biorolls or mulch on slopes to prevent washouts during monsoon storms.

Yes, many regional suppliers serving West Arizona offer screened, low-organic, or screened fill-dirt options; washed material is less common and usually more expensive. Typical hauls for Douglas-area deliveries are often within a 10 to 50 mile radius, but availability and pricing depend on local pits and trucking; longer hauls add fuel and time charges. Use Hello Gravel to check nearby supplier options and see estimated haul distances and costs for your zip code.

Longevity depends on compaction quality, use, and drainage. Poorly compacted fills or areas subject to vehicle traffic and erosion may need touch-ups within 1 to 5 years, while well-prepared, compacted, and finished areas can remain stable 5 to 15 years or longer. To extend life, compact properly at installation, stabilize slopes, and add a durable wearing surface where vehicles will travel.

Provide clear access instructions, gate codes, preferred drop location, and note any low-hanging wires, tight turns, or soft spots on your property before delivery. Expect standard delivery windows and remember tailgate spreading is at the driver’s discretion; request spreading at checkout but be prepared for the driver to assess safety on arrival. Also consider scheduling deliveries outside of peak monsoon periods to reduce the risk of soft ground and rescheduling.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.