Fill Dirt in Foothills, AZ

Delivered fill-dirt in the Foothills typically ranges from about $12 to $35 per ton, depending on distance, truck access, and moisture or screening. A useful rule of thumb is about 1.2–1.6 tons per cubic yard (commonly use 1.4 tons/cu yd), so that works out to roughly $17 to $49 per cubic yard. Exact pricing depends on your zip code and site conditions, so get a quote through our checkout to see local rates.

For grading and raising low spots in Foothills, a clean, low-organic fill dirt (often called structural or compactable fill) is best because it compacts well and resists settlement. For a driveway base, use compactable fill dirt only as a subgrade; top with crushed rock or crusher fines designed for drainage and load-bearing. Contractors often specify engineered or screened fill when a high degree of compaction and stability is required.

Local contractors commonly provide rough grading, moisture conditioning, and compaction using plate compactors or small rollers to reach target density. For larger jobs they will perform lift placement (placing fill in layers and compacting each lift) and may provide compaction testing on request. Additional services can include grading for proper drainage, edging, and prepping for final surfacing.

To raise 1,000 sq ft by 4 inches you need about 12.35 cubic yards of material (1,000 x 4/12 ÷ 27 = 12.35 cu yd). Using a common conversion of about 1.4 tons per cubic yard, that is roughly 17 to 18 tons. Order 10–15% extra to allow for compaction and minor grading adjustments.

Hot, dry conditions in Foothills cause fill-dirt to dry and settle more quickly, which increases the chance of shrinkage and low spots. Monsoon rains can cause surface erosion and wash fines away if the site isn’t graded for drainage or covered with a protective cap like gravel. Proper compaction, correct grading for runoff, and a surface layer (gravel, pavers, or vegetation) reduce maintenance needs and erosion risk.

Hello Gravel’s minimum order is 3 tons; most deliveries use tri-axle dump trucks that need standard driveway access and a clear turning radius and are typically 8–10 feet wide with a 30+ foot turning area. Surcharges may apply for tight access, long carries from the street, stairs, narrow lanes, or permits and long-haul distances. Request delivery notes at checkout and include photos or details so drivers and suppliers can assess access and any extra fees in advance.

Many Foothills neighborhoods have HOA rules that restrict visible grading, front-yard changes, or the addition of certain materials, so check your HOA guidelines before ordering. For larger regrading jobs or any work that changes drainage, county or city permits may be required—especially if you alter stormwater flow or exceed local cut-and-fill thresholds. If you’re unsure, contact your local planning department and HOA; Hello Gravel can also help identify likely permit needs when you request a quote.

Well-compacted fill-dirt used beneath lawns, pads, or under a gravel cap can remain stable for many years, but some settling is normal in the first 1–2 years. For exposed surfaces like driveways or leveling pads without a protective surface, expect to top up or regrade small areas every 2–5 years due to settling and erosion from monsoons. Using proper compaction, adding a gravel or crusher-fines wearing layer, and controlling drainage will significantly reduce how often you need to add material.

Drivers may be able to perform tailgate spreading at their discretion; you can request spreading at checkout, but it is not guaranteed. Upon arrival the driver will assess safety, site access, and whether spreading can be done without damage to property or equipment. For reliable spreading or precision placement, schedule a local contractor to handle distribution and compaction after delivery.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.