Fill Dirt in Fredonia, AZ

Delivered prices for fill-dirt in Fredonia vary with haul distance and stock availability; expect a typical range of about $20 to $50 per ton in remote West Arizona areas, though prices can be lower or higher depending on supplier and season. Hello Gravel has a minimum order of 3 tons and shows exact pricing for your zip code during checkout, including any delivery fees or next-day charges.

Fredonia is a small town, so local stock may be limited and material often comes from nearby regional yards; Hello Gravel connects you to trusted local suppliers and contracted dump-truck haulers who service the area. Standard delivery is usually 2+ business days, next-day may be available if ordered before noon CST with an added fee, and drivers may offer tailgate spreading at their discretion if requested at checkout.

A practical rule of thumb for fill-dirt is about 1.2 to 1.4 tons per cubic yard depending on moisture and compaction; a commonly used estimate is 1.3 tons per cubic yard. To calculate, measure the area (length x width x depth in feet), divide cubic feet by 27 to get cubic yards, then multiply by 1.3 to get tons; for example, 10 ft x 10 ft x 1 ft = 100 cu ft = 3.7 cu yd x 1.3 = about 4.8 tons.

For compactible fill in high-desert Fredonia, request a well-graded soil or 'fill-dirt' with a mix of sand, silt and small gravel and minimal organic material; suppliers often call this 3/4" minus or screened fill. Avoid loose topsoil or high-organic material—well-graded, low-organic fill will compact better and be less likely to settle or erode in the local dry climate.

Yes. Monsoon season (mid-summer) can make sites muddy, reduce truck access, and slow compaction work, while winter freeze/thaw cycles can prevent proper compaction and increase settling risks. Plan deliveries and compaction for dry, non-freezing periods when possible and discuss timing with Hello Gravel and your installer to avoid weather-related issues.

Permit and HOA rules vary by property: Fredonia is in Coconino County, so minor grading or large earthimports may require county permits or approvals; many HOAs have specific rules on changes to exterior grades. Check with the Fredonia town office, Coconino County Planning, and your HOA before ordering large quantities to avoid fines or required rework.

For driveways, compacted lifts of 6 to 8 inches are common for hand or plate compaction; for heavy equipment or roller compaction, lifts up to 8 to 12 inches may be acceptable. For structures or load-bearing areas, use engineered fill and a compaction plan with proof rolling and testing; consult an engineer for foundations, while contractors can typically use plate compactors for small residential fills and vibrating rollers for larger jobs.

Control dust with periodic watering, polymer tackifiers, or covering exposed loads during transport; stabilizing surfaces with gravel, paving, or vegetation also helps. For drainage, slope fills away from structures at 1/4" to 1/2" per foot minimum, use filter fabric and a gravel subdrain where needed, and avoid placing fine fills where water will pond or flow through the material.

Fill-dirt is suitable for raising grades and backfill but is not a structural base for driveways or pavements; crusher-run or road base are better choices under driveways because they interlock and drain. Engineered fill is recommended under foundations and structures because it is specified and tested for compaction and bearing capacity; for erosion control on slopes, use engineered soils, geotextile, or riprap depending on severity.

All fill-dirt will settle somewhat, especially in the first year as moisture cycles compact the material; expect some minor settling and the need for regrading or adding more material in low spots within 6 to 12 months. For areas with traffic or structure loads, proper initial compaction, use of suitable base materials, and drainage control will reduce maintenance needs and extend performance.

Include delivery access details (narrow driveways, gates, overhead clearance), desired drop location, any requested tailgate spreading, and project timing preferences around monsoon or freezing periods. Also list material preferences ("screened fill-dirt," low-organic) and contact information so the driver or supplier can confirm specifics before dispatch.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.