Fill Dirt in Grandcanyon, AZ

Fill-dirt is soil, often a mix of subsoil, sand, and fines, used to raise or level ground and backfill around foundations. Unlike gravel, it contains little to no crushed rock and is not designed for surface drainage or a finished driving surface; gravel provides drainage and a stable wearing layer while fill-dirt is primarily for bulk grade changes or structural backfill.

Material-only, fill-dirt is usually cheaper per ton than gravel in the Grandcanyon area because it is less processed. However, using fill-dirt as a final driveway surface is not recommended—you’ll likely need gravel or crushed rock on top and compaction work, so total project cost can end up higher if you skip proper base preparation.

Prices vary with local supply and delivery distance; in West Arizona expect fill-dirt to range broadly, often from about $10 to $40 per ton delivered, with remote Grand Canyon-area sites toward the higher end. Hello Gravel has a 3-ton minimum; check your zip code for exact pricing and any delivery surcharges for remote access.

A typical tri-axle load is about 10–14 cubic yards (roughly 11–15.5 tons, since 1 cu yd ≈ 1.1 tons). That will cover approximately 1,620–2,268 sq ft at 2" depth, 810–1,134 sq ft at 4" depth, or 540–756 sq ft at 6" depth. Use the rule: cubic yards needed = area (sq ft) × depth (ft) ÷ 27 to calculate your exact needs.

Total cost depends on load size, mileage, road access, and local hauling conditions; remote Grand Canyon deliveries commonly include extra fuel or access fees. Expect delivery-inclusive loads to vary widely (for example, several hundred to over a thousand dollars), so get a quote from Hello Gravel for your exact address—our checkout will show any remote delivery surcharges.

Cost depends on depth. For 1,000 sq ft at 4" depth you need about 12.3 cubic yards (≈13.6 tons); using a typical fill-dirt delivered price range of $10–$40 per ton gives a material cost estimate of about $136–$544, plus any delivery or remote-access fees. For an exact quote enter your zip code at checkout or contact our team for site-specific pricing.

First define the driveway area (for example, a 20 ft long by 10 ft wide driveway equals 200 sq ft). For a 4" fill-dirt base you would need about 2.5 cubic yards (≈2.7 tons). Material cost will follow local per-ton pricing, delivery adds a charge depending on access, and compaction typically requires either a plate compactor rental ($75–$150/day) or contractor fees (often a few hundred dollars) — add a gravel/topcoat cost on top of the base materials and compaction to finish the driveway.

You should prepare the site first: remove vegetation, large debris, and soft organic topsoil if present, and then place fill-dirt in lift layers for compaction. In arid Grandcanyon conditions the soil can be loose and uneven, so compacting each lift is important to prevent future settling—skipping preparation will likely cause voids and uneven surfaces later.

Yes, fill-dirt generally needs compaction when used for structural fills or driveway bases—compacting in 4–8" lifts with proper moisture control reduces settling. Hello Gravel delivery drivers may perform tailgate spreading at their discretion but do not guarantee compaction services; some local suppliers or contractors in West Arizona offer compaction as an add-on, and equipment rental houses in the region rent plate compactors and rollers for DIY projects.

Fill-dirt usually lacks organic matter and nutrients, so plants will struggle to thrive in plain fill-dirt, especially in the arid Grandcanyon climate. For landscaping you should add a layer of quality topsoil or amend the fill with compost and organic material, and choose drought-tolerant native plants to improve establishment and reduce irrigation needs.

Order online at Hello Gravel by entering your zip code to see availability and pricing; our minimum order is 3 tons and you can choose a delivery date during checkout. Deliveries come by local dump trucks (typically tri-axle); drivers may offer tailgate spreading at their discretion, access and remote locations can affect delivery fees, and our sales team is available if you need help calculating quantities or scheduling.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.