Fill Dirt in Heber, AZ

Typical delivered prices for bulk fill-dirt in the Heber area vary based on supplier and distance, but you can expect a broad range of roughly $10 to $30 per ton delivered. Exact cost depends on haul distance, minimum-order requirements, and whether you request services like tailgate spreading or next-day delivery. Check your zip code on Hello Gravel for an accurate quote and note our minimum order is 3 tons.

Suppliers are regionally sourced and availability around Heber can be limited because the town is small, so lead times may be longer than urban areas. Use Hello Gravel’s website to check your zip code, request a delivery date, and see which local suppliers we can connect you with. If you need large volumes or special gradation, contact our team early so we can confirm supplier stock and truck scheduling.

Heber’s hot summers and monsoon rains can cause fill-dirt to dry, crack, erode, or wash into low spots if not compacted and protected. Proper compaction, a cap layer (gravel or crushed rock) for driveways, and erosion controls (drainage swales or silt fences) reduce problems during monsoon season. Plan deliveries and installation outside heavy rain windows when possible to avoid delayed compaction and extra hauling.

For structural fill in desert soils, request well-graded fill-dirt with a mix of fines and sand-sized particles so it compacts well; particle sizes typically range from fines up to about 3/4 inch. Avoid topsoil or fill with high organic content, and ask suppliers for a subsoil-type fill rather than loose sandy or silty material if you need a stable base. If you need a specific spec for a permit or engineered pad, ask the supplier for a gradation or material description before ordering.

A quick rule: calculate the volume in cubic yards (length x width x depth in feet ÷ 27) and then convert to tons using about 1.2 to 1.4 tons per cubic yard for loose fill-dirt. For example, a 10 ft by 20 ft area filled 6 inches deep is 10 x 20 x 0.5 ÷ 27 ≈ 3.7 cubic yards, or roughly 4.5 to 5.2 tons. Always add 10% to 20% extra to allow for compaction and settling.

Permit and compaction requirements vary by project type and local jurisdiction; small landscaping fills often do not need permits, but structural fills, building pads, or grading changes usually require county approval. Many engineered residential fills call for compaction testing to meet a specified percent of standard Proctor (often around 90% as a common target), but you should confirm exact requirements with the Navajo/Apache county building department or your project engineer. When in doubt, contact Hello Gravel or a local contractor early so the material and compaction plan meet local code.

Fill-dirt is intended to raise grade or fill voids and creates a compactable base, but it is not a good wearing surface for driveways and is vulnerable to erosion. Crushed rock or crushed gravel provides a stable, long-lasting driveway surface and better drainage, while decomposed granite makes an attractive low-maintenance path surface but can rut under heavy traffic unless stabilized. For driveways in Heber, use fill-dirt to build up and grade, then cap with crushed rock or gravel designed for driving surfaces.

If properly placed and compacted and then covered with an appropriate surface layer, fills can perform for many years, but bare fill-dirt surfaces will settle, erode, and require regrading after heavy monsoon storms. Expect periodic maintenance such as adding material to low spots, regrading after erosion events, and maintaining drainage features. Using a finished gravel or pavement layer over the compacted fill significantly reduces long-term maintenance.

Install fill-dirt in uniform lifts (6 to 8 inches loose) and compact each lift with the right equipment: plate compactors or walk-behind rollers for small jobs, and a vibratory sheepsfoot or padfoot roller for larger or deeper fills. On slopes, build terraces or benches, use geotextile fabric where indicated, and add erosion controls like silt fence, straw wattles, or rock check dams to prevent washouts during monsoon rains. For steep fills or structural work, consult an engineer and use retaining walls or engineered slope treatments as needed.

Yes. Monsoon season can delay deliveries due to muddy roads and safety closures, and suppliers may limit haul into wet sites until ground conditions improve. Summer heat does not usually stop deliveries but can affect driver schedules and material conditioning; order early and consider next-day delivery options when available for urgent jobs. Use Hello Gravel to check current supplier schedules and confirm access, truck size, and drop location before delivery since tri-axle dump trucks require clear access and a flat drop area.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.