Fill Dirt in Lake Montezuma, AZ

Typical delivered prices for fill-dirt in the Lake Montezuma area vary based on supplier distance and truck access; expect a broad range roughly $8 to $30 per ton landed. Remote or steep-driveway deliveries on tri-axle trucks can push the higher end, and Hello Gravel has a 3-ton minimum and shows exact delivered pricing when you enter your zip code.

Fill-dirt commonly weighs about 1.2 to 1.5 tons per cubic yard depending on moisture and compaction; a practical rule is 1 cubic yard ≈ 1.3 tons. For 1,000 sq ft the approximate needs are: 2" depth ≈ 6.17 cubic yards (about 8 to 9.5 tons), 4" ≈ 12.35 cubic yards (about 15.5 to 18.5 tons), and 6" ≈ 18.52 cubic yards (about 22 to 27.5 tons). Always order a bit extra (5-10%) for compaction and grade adjustments.

Hello Gravel connects you with local Yavapai County suppliers and quarries that commonly source fill-dirt from areas near Cottonwood, Camp Verde, Prescott and other nearby pits. Screened or manufactured fill-dirt availability varies by supplier; check availability and specs in our checkout after entering your zip code so we can match you with the closest option.

In Lake Montezuma’s arid summers fill-dirt can dry, shrink and become dusty unless capped or vegetated; during monsoon rains loose or uncompacted fill can erode or wash if not graded properly. For best results compact fill in lifts, provide positive drainage away from structures, and consider a gravel or hard-surface cap where erosion or vehicle traffic is expected.

Mechanical compaction is recommended for any structural use such as driveway subgrade, building pads, or large grade raises in Lake Montezuma; small landscaping fills may only need hand tamping. Best practice is to place fill in lifts (4 to 6 inches) and compact each lift; large projects should follow local code and a soils engineer recommendation or county inspection.

Fill-dirt is an economical material for raising grade and filling low spots but it does not make a stable wearing surface for driveways. Crusher run and base gravel provide interlocking strength and drainage that perform much better under vehicle traffic, while decomposed granite is attractive for low-traffic paths but can dust or wash in monsoon storms. In Lake Montezuma you’ll typically use fill-dirt to build grade, then cap with crushed stone or base gravel for driveways.

Large grading, cut-and-fill, or any work affecting drainage often triggers permits or review by Yavapai County; septic systems, lot setbacks and erosion controls are also regulated. Before importing large volumes of soil or changing grades, contact Yavapai County Planning and the County Environmental Health Department to confirm permit thresholds and inspection requirements.

In the West Arizona area, labor and equipment costs vary, but expect local contractors to charge for machine time (bobcat/excavator: roughly $75 to $150 per hour) plus labor, with additional charges for compaction equipment. Hello Gravel handles material delivery; for spreading and compaction get multiple quotes and ask contractors to include lift thickness, compaction target, and disposal/cleanup in their estimate.

Maintenance frequency depends on traffic and storm intensity, but many rural driveways in the Lake Montezuma climate need seasonal regrading or spot additions after the monsoon season each year or every few years. Keeping a compacted gravel cap and maintaining proper crown and drainage greatly reduces the need for frequent repairs.

Slope finished grades away from patios and foundations (generally a 5% grade or about 6 inches over 10 feet) and compact fill in lifts to minimize settlement. Do not place fill over septic drain fields without county approval; behind retaining walls use free-draining backfill (gravel) and drainage pipes or fabric to prevent hydrostatic pressure. For patios and paver areas, install a properly compacted gravel base over the fill-dirt and verify elevations before finishing.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.