Fill Dirt in Mcnary, AZ

Delivered fill-dirt prices in the Mcnary area commonly range from about $12 to $40 per ton (roughly $9 to $30 per cubic yard), depending on whether the material is screened, how far the hauler must travel, and seasonal demand. Remote locations like Mcnary tend toward the higher end because of longer haul distances and smaller supplier pools. Hello Gravel shows any delivery fees up front in the quote so you can see distance and screening effects on price.

Yes, but availability varies. Mcnary is small and suppliers that offer screened or engineered fill-dirt may be limited; Hello Gravel connects you with local producers and can request screened or engineered material when available. If you need engineered specs, ask our team so we can check which nearby suppliers can meet gradation and testing requirements.

For load-bearing areas in arid climates like Mcnary, use a well-graded, compactable fill with a mix of sand and small gravels (often a ‘minus’ product with particles up to 3/4"–1.5" and fines to aid compaction). Avoid high-organic topsoil and very clayey soil that can shrink or swell. Engineered fill or screened fill-dirt with low organic content gives the most predictable compaction and stability in hot, dry conditions.

Fill-dirt in Mcnary will hold up for grading and raising areas, but monsoon pulses and sheet flow can cause erosion if drainage is not handled. For driveways and pads, contractors commonly place a compacted granulated base (crusher run or road base) and a geotextile underlayment where needed to separate soft subgrade and control washout. Chemical stabilizers are occasionally used for slopes or poor native soils, but good drainage, compaction, and a granular wearing layer are the primary defenses.

Use 1.2 to 1.6 tons per cubic yard as a practical density range for fill-dirt in this region. For 1,000 sq ft: 4" (0.333 ft) requires about 12.35 cubic yards or roughly 15–20 tons; 6" (0.5 ft) requires about 18.52 cubic yards or roughly 22–30 tons; 8" (0.667 ft) requires about 24.69 cubic yards or roughly 30–40 tons. Always round up for compaction loss and note Hello Gravel minimums apply (3 tons minimum order).

Most contractors near Mcnary prefer crusher run or road base for rural driveways because those products compact tightly, shed water better, and form a stronger wearing surface than plain fill-dirt. Fill-dirt is commonly used to raise grades, fill low spots, or for non-traffic areas, but it is usually capped with a granular base for driveways and pads in arid, variable soils. Ask your contractor whether engineered base is required for your driveway and we can source the right material.

McNary sits in Apache County, and local road or county restrictions can apply to heavy truck traffic or oversized loads—especially on thin or residential roads. Seasonal and bridge weight limits may also be enforced. Before delivery, check with Apache County public works or tell Hello Gravel about any narrow or weight-restricted roads so we can coordinate an appropriate truck and routing.

Contractors in the area commonly compact fill-dirt in 4" to 6" loose lifts using a vibratory plate or walk-behind roller for small jobs and a small vibratory or sheepsfoot roller for larger areas. Several passes per lift and occasional moisture conditioning (light watering) improve density in hot, dry soils. For rocky or mixed native soils, heavier compaction equipment and thinner lifts may be needed to achieve the desired density.

Recycled fill-dirt (from construction or screening operations) is sometimes available near Mcnary but quality varies. It can be acceptable for residential grading if it is screened, free of debris and organic material, and meets local building department requirements. Always disclose the source to your inspector and request a sample or description when ordering through Hello Gravel.

Beyond the material price, budget for spreading (labor or tailgate spreading fees), compaction (equipment rental or contractor labor), and extra hauling for long distances. Typical contractor or service fees in rural Arizona can range from $75 to $300+ for spreading per visit and $150 to $500+ per day for compaction equipment or crew, but actual costs depend on site access and job size. Hello Gravel will show delivery charges in your quote and our team can help estimate spreading and compaction costs for your property.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.