Fill Dirt in Queen Creek, AZ

Yes. Buying larger quantities usually lowers the per-ton price because trucks carry full loads and suppliers give volume discounts. Keep in mind Hello Gravel has a 3-ton minimum, and ordering a truckload (typically 10-12 cubic yards) will usually give the best per-ton rate.

One ton of typical fill-dirt in loose form is about 0.83 cubic yards (roughly 22.4 cubic feet). That will cover about 270 sq ft at 1 inch deep, about 90 sq ft at 3 inches, or about 45 sq ft at 6 inches. Always account for compaction and add 10-30% extra for settling, especially in Queen Creek’s desert soils.

A 10-yard load is roughly 10 cubic yards (about 12 tons of fill-dirt). Prices vary with supplier, distance, and seasonal demand, but expect a ballpark range of several hundred dollars delivered; get an exact quote through Hello Gravel by entering your zip code. Remember the final price can include haul fees and access or spreading requests.

Multiply area by depth to find volume: a 10x10 area is 100 sq ft. For 3 inches of fill you need about 0.83 cubic yards (roughly 1 ton); for 4 inches you need about 1.23 cubic yards (about 1.5 tons). Because Hello Gravel’s minimum order is 3 tons, most homeowners will order the 3-ton minimum and save the extra for future grading or leveling.

Typical tri-axle dump trucks used by Hello Gravel suppliers hold about 10-12 cubic yards, which equals roughly 12-14 tons of fill-dirt depending on moisture and composition. Larger end-dump trucks can carry 15-20 cubic yards (about 18-24 tons). Your quote will show the truck size used in your area and the total tons included.

Costs vary by supplier, load size, and delivery distance; in Queen Creek expect delivered fill-dirt to fall within a moderate range rather than a single fixed price. For planning, use a local quote from Hello Gravel—enter your zip code for an accurate, up-to-date price because factors like truck availability and regional material supply affect the per-ton cost.

Fill-dirt can be used to raise and grade a driveway subgrade, but it is not an ideal finished driveway surface. For a long-lasting driveway in Queen Creek’s climate you’ll typically place compacted fill-dirt to set grade, then install a proper base (crushed rock or base course) and surface material. If you have clay, caliche, or drainage concerns, consider a local contractor or soil test before full build-out.

Loose piles of fill-dirt can provide temporary hiding places for rodents, snakes, and scorpions common to the Queen Creek area, but the dirt itself does not 'attract' pests in the way food would. To reduce risk, avoid long-term piles next to your home, compact and grade material promptly, and clear brush or debris where pests could hide. For termite concerns, note that fill-dirt is not a proven deterrent and proper construction practices are the best protection.

Buy local and order larger quantities to lower per-ton costs, schedule delivery during off-peak times if possible, and provide an easy drop location to avoid extra labor charges. Using Hello Gravel’s platform to compare nearby suppliers and accepting a full truckload when practical are the most reliable ways to reduce cost. Always confirm any additional fees for tight access, spreading, or permit requirements.

No. Fill-dirt generally has low organic matter and poor structure for plant growth, so it is not a substitute for topsoil or planting mix. Use fill-dirt to build grade or fill below the planting zone, then cover with several inches of quality topsoil for lawns, flower beds, and gardens in Queen Creek’s arid environment. If you plan landscaping, order topsoil separately or request mixed deliveries through Hello Gravel if available.

Use this simple formula: Length (ft) × Width (ft) × Depth (ft) ÷ 27 = cubic yards, then multiply cubic yards by about 1.2 to convert to tons (this assumes roughly 1.2 tons per cubic yard). Add 10-30% extra for compaction and settling depending on how loose the material is and how critical final grade is. Or use Hello Gravel’s material calculator and enter your project dimensions for an instant estimate.

Drivers may be able to perform tailgate spreading at their discretion; request this service at checkout and the driver will assess safety and feasibility on arrival. Hello Gravel does not guarantee spreading services, so plan for additional labor if you need precise spreading or compaction. If spreading is essential, note it in Order Notes and discuss options with Customer Service before delivery.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.