Fill Dirt in Rio Rico Northeast, AZ

Delivered fill-dirt in the Rio Rico Northeast area commonly runs in the range of about $12 to $35 per ton (rough estimate). Per cubic yard that usually translates to roughly $15 to $55 per cubic yard depending on whether the dirt is loose or compacted, truck access, and distance from the local pit. Final price depends on supplier, hauling distance, seasonal demand (monsoon and spring grading season), and whether the material is screened or contains rocks.

Hello Gravel's minimum order is 3 tons, which applies in the Rio Rico Northeast area as well. Most local suppliers and haulers serving Santa Cruz County will deliver within roughly 25 to 75 miles of their source; farther deliveries add hauling charges. Check availability for your zip code and get a delivered price during checkout to see exact radius and fees.

High summer heat dries soils quickly and the monsoon season can cause heavy, short-duration rains that promote erosion and settlement. Compact fill in thin lifts (typically 4 to 8 inches) and install proper drainage or erosion control before monsoons to reduce washouts. For landscape or graded areas, tack down slopes with hydroseed, straw, or rock check dams until vegetation or permanent surfacing is in place.

Permitting rules can vary by project and parcel in Santa Cruz County; small landscaping fills often do not require a permit, but substantial grading, changes to drainage, or fills near floodplains and rights-of-way commonly do. Before ordering large volumes, contact Santa Cruz County Community Development or check county planning resources to confirm permit thresholds and any erosion-control requirements. When in doubt, get a short engineering or permitting consult—it's often less costly than rework.

For non-structural landscaping use compacted fill lifts of 4 to 6 inches to achieve good density and reduce settlement. Driveway subgrade (when using fill-dirt under base) typically requires 6 to 12 inches of compacted fill followed by a properly graded base rock; however, use base rock rather than clean fill as the wearing surface. For building pads or foundations, engineered fill and a soils report are recommended; contractors commonly compact in 6-inch lifts to the compaction spec in the soils report rather than relying on generic values.

Common alternatives include crusher run/base rock, decomposed granite (DG), and engineered structural fill. Fill-dirt is usually the least expensive for bulk raising of grade but may not provide the drainage or load-bearing characteristics of crusher run or base rock, which are better for driveways and roads. Decomposed granite is popular in southern Arizona for decorative paths and patios but is more costly per yard than raw fill-dirt and less suitable for structural loads; engineered fill is the most expensive but required where structural performance and reduced settlement are critical.

Loose fill-dirt in Rio Rico Northeast typically weighs about 2,200 to 3,000 lb per cubic yard (rough range), so 1 cubic yard is roughly 1.1 to 1.5 short tons. Compacted densities are higher, so allow about 1.3 to 1.6 tons per cubic yard for compacted fills. Use this quick formula: cubic yards = tons ÷ (tons per cubic yard), and always order a 5-10% overage to account for compaction and site losses.

Soils in the Rio Rico area often include alluvial sands and silts with occasional caliche or gravels; some native soils can be dispersive or clay-rich and may shrink or swell with moisture changes. Ask suppliers whether the fill is screened topsoil, native borrow, or contains fines and caliche, and share project details so they can match acceptable material. For structural work, ask for certified or engineered fill meeting your soils report rather than generic fill-dirt.

Measure your area and use the Hello Gravel calculator to estimate yards or tons, then add 5-10% for compaction and waste. Choose a delivery date that avoids monsoon forecasts, request tailgate spreading at checkout if you want the driver to help (drivers perform this at their discretion), and contact Hello Gravel customer service if you need to change or cancel before the order is processed.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.