Fill Dirt in Taylor, AZ

Typical delivered prices for fill-dirt around Taylor, AZ, usually fall in the range of about $8 to $20 per ton (roughly $10 to $25 per cubic yard). Final price depends on haul distance, truckload size, access challenges, and seasonal demand (monsoon season can raise costs); use our zip-code quote tool for exact pricing.

Hello Gravel connects you with local suppliers and contracted haulers that serve Taylor and Navajo County. Most haulers accept the company minimum of about 3 tons; rural jobs sometimes require a full truckload (typically 10–14 tons) or an extra trip fee, so check delivery minimums in checkout or ask our team for details.

Typical fill-dirt in arid Arizona compacts down so you can expect roughly a 10–25% reduction in loose volume when properly compacted (a compaction factor of about 1.1–1.25). As-built weight varies with moisture, but a practical planning range is about 1.1 to 1.4 tons per cubic yard; final figures depend on local soil mix and on-site compaction level.

For driveway or base work in Taylor, place fill-dirt in controlled lifts and compact each layer—4 to 6 inches per lift for mechanical plate compactors and 6 to 8 inches for heavier rollers. Thinner lifts and proper moisture conditioning yield better compaction and stability for load-bearing or paved surfaces.

Arizona monsoon storms can cause erosion, washouts, and softening of recently placed fill, while prolonged dry heat makes loose dirt dusty and harder to achieve uniform moisture for compaction. To reduce problems, protect fresh fills from heavy rain, grade for surface drainage, add moisture and compact during cooler parts of the day, and consider a gravel cap or geotextile to reduce erosion and dust.

Navajo County commonly requires permits and compaction testing for structural building pads, foundations, and engineered backfill; simple landscaping or non-structural fills often have fewer formal requirements. Always check with Navajo County Community Development or the Town of Taylor building officials before ordering so you meet permit, compaction test, and inspection requirements for your specific project.

To raise 1,000 sq ft by 6 inches you need about 500 cubic feet, which is approximately 18.5 cubic yards (roughly 20–26 tons of typical Arizona fill-dirt, depending on moisture and compaction). To raise the same area by 12 inches you need about 1,000 cubic feet or 37 cubic yards (roughly 40–52 tons). Always order 5–10% extra to allow for compaction, grading, and minor waste.

Tell the hauler about driveway width, overhead wires, low tree limbs, soft shoulders, and whether street parking or permits are needed in Taylor; tri-axle dump trucks are commonly used and need clear turning space. If you want tailgate spreading, request it at checkout but note drivers perform it at their discretion; placing a defined drop zone and marking the area speeds delivery and reduces re-handling.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.