Fill Dirt in Toltec, AZ

Typical delivered prices for fill-dirt in Toltec generally fall in the range of $12 to $30 per ton, depending on supplier, distance from the source, and order size. Prices can vary seasonally and with road access or site conditions, so request a quote through Hello Gravel or check your zip code for the most accurate, up-to-date pricing.

Hello Gravel requires a minimum order of 3 tons, but common local truckloads are tri-axle deliveries that carry about 10 to 14 tons of fill-dirt. Many suppliers offer lower per-ton pricing for full truckloads or orders above about 20 tons; ask for volume pricing when you request a quote to see specific bulk discount tiers.

To raise 1,000 sq ft by 6 inches you need about 18.5 cubic yards, which translates to roughly 22 to 26 tons of fill-dirt depending on density (about 1.2 to 1.4 tons per cubic yard). Compaction and site conditions can reduce loose volume by 10% to 30%, so plan to order an extra 10% to 25% to allow for compaction and settling, or ask Hello Gravel to help calculate an exact amount for your specific site.

Fill-dirt is fine for raising grade, filling low spots, and backfill, but it is not usually a good final surface for driveways or structural building pads unless it is clean of organics, properly compacted, and specified by an engineer. In Toltec’s arid, sandy conditions you get good drainage but may have lower load-bearing capacity; for driveways and pads, consider compacted road base or engineered fill rather than plain fill-dirt.

Permit requirements vary by city and county; Toltec homeowners should check with the Toltec city building or planning department and the county for rules on grading, driveways, and changes to drainage. In general, permits are more likely if you alter site drainage, move large volumes of material, or build pads that affect setbacks, so contact local authorities before starting larger projects.

Fill-dirt typically contains fine-grained soil with occasional rock fragments and low amounts of crushed stone; particle sizes are mostly silt, sand, and small gravels. Road base is a different product: it contains a controlled mix of crushed rock and fines designed to compact tightly for load-bearing surfaces, so for driveways or pads choose road base or a specified engineered granular fill rather than standard fill-dirt.

A driveway surfaced purely with fill-dirt will need frequent maintenance, such as regrading and adding material after storms or vehicle use, and is likely to degrade within months to a few years under regular car traffic. For longer life with less upkeep in Toltec’s conditions, finish with a compacted road base or crushed stone and schedule periodic regrading or top-up material every few years.

Fill-dirt is best for raising grade and backfill but not for finished, load-bearing drive surfaces. Road base and crushed rock are the better choices for driveways because they compact and hold up under traffic; decomposed granite can work for light-use, aesthetic paths when stabilized but may not be durable for frequent vehicle use in sandy soils. Choose the material based on traffic, drainage needs, and whether you can compact and maintain the surface.

Hello Gravel can arrange delivery and you can request tailgate spreading at checkout, but spreading is performed at the driver’s discretion and is not guaranteed. Compaction is typically not included with standard deliveries, though some local suppliers or contractors may offer turnkey spreading and compacting for an additional fee; request this service in your quote or call our team to see which partners are available for full-service jobs.

Moisture and compaction have a big impact on settling: properly compacted fill placed in lifts will settle much less, while loose or dry fill in Toltec’s arid climate may appear stable then settle when wetted or driven over. Irrigation, landscaping, and seasonal rains can cause localized settling or erosion, so compact fill in 6-8 inch lifts, pre-wet when appropriate, and order 10% to 25% extra material to allow for future adjustments.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.