Fill Dirt in Williams, AZ

Prices vary with local supply and haul distance, but in Williams you can generally expect fill-dirt to run roughly $10 to $25 per cubic yard (about $8 to $20 per ton) delivered. Remote or high-elevation deliveries and requests for special screening may push pricing toward the upper end; check our online quote for exact, up-to-date rates for your zip code.

For grading and raising low areas in Williams, choose a clean, screened fill-dirt with low organic matter and minimal large rock so it compacts well. For driveways, use fill-dirt only as subgrade; top it with a crushed stone or road-base layer for durability in the region’s seasonal freeze and snow.

One loose cubic yard of typical fill-dirt is about 1.2 to 1.4 tons; a good rule of thumb is 1.3 tons per cubic yard. A 10x10 area at 6 inches deep is 1.85 cubic yards (about 2.4 tons); a standard 10x10x12" would be 3.7 cubic yards (about 4.8 tons).

Fill-dirt performs well as bulk fill in Williams’ semi-arid, high-elevation climate if it is free of organic material and properly compacted in lifts. Freeze/thaw and occasional snow can cause settling if material is loose or contains fines; compaction and a proper surface wearing course (for driveways) reduce those risks.

Hello Gravel works with trusted local suppliers and haulers serving Williams and the surrounding West Arizona region; availability depends on your zip code. Typical minimum online orders start at 3 tons, which aligns with our nationwide minimum, and tri-axle dump trucks are commonly used for delivery. Use our checkout or contact our sales team to see which local supplier is assigned to your order.

Labor and equipment costs vary by contractor, but expect operator rates plus machine rental: small excavator/skid-steer time commonly ranges $150 to $350 per hour, and a ride-on plate or small roller runs about $100 to $200 per hour. Many homeowners pay contractors a flat crew rate for a half- or full-day to spread and compact material; get local quotes for precise pricing and mention Williams site access and elevation when requesting bids.

Fill-dirt is the least expensive option for raising grade or backfilling, but it is not a durable driving surface. Crusher-run and road base are designed to compact into a stable, load-bearing surface and are better choices for a driveway in Williams; they cost more up front but last longer and need less maintenance. A common approach is fill with screened fill-dirt, then install a 4" to 8" layer of crusher-run or road base on top for the driveway surface.

To support light vehicles, place fill-dirt in 4" to 6" lifts and compact each lift thoroughly until you achieve at least 90% to 95% relative compaction per standard field testing or an engineer’s recommendation. In practice, many residential sites use 8" to 12" of compacted engineered fill or road base as the structural layer beneath any top surface for reliable vehicle support.

As a buried subgrade, properly compacted fill-dirt can last indefinitely, but surface or loose fill will settle and may need occasional regrading, especially after heavy rains or freeze cycles. If used temporarily or as a surface, expect to re-level and re-compact in the first year; adding a wearing course like crusher-run extends service life and reduces maintenance in Williams’ climate.

Yes. Changing grades, moving significant quantities of dirt, or altering drainage may trigger permits or erosion-control requirements from the Town of Williams or Coconino County. Check local codes and, if in doubt, contact the town or your contractor before work begins; our sales team can also help point you toward local permitting resources.

Measure the space and use our material calculator to estimate cubic yards, then convert to tons using about 1.3 tons per cubic yard to check our minimum order of 3 tons. Select screened or select fill if you need good compaction, request delivery date windows at checkout (standard is 2+ business days, next-day possible before noon CST), and add order notes for access details or preferred drop location.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.