Fill Dirt in Moroni, UT

Delivered fill-dirt in the Moroni/West Utah area typically runs in the range of $12 to $25 per ton, depending on source, distance, and truck access. Hello Gravel has a 3-ton minimum and standard delivery takes 2+ business days; remote or difficult-access drops can add hauling fees. Get an exact quote by entering your zip code on our site or contacting our team.

Hello Gravel connects you with local suppliers and contracted dump truck haulers in the West Utah region to deliver bulk fill-dirt to Moroni. Deliveries are usually by tri-axle dump truck, have a 3-ton minimum, and tailgate spreading may be available at the driver’s discretion; always add delivery notes and photos to your order to confirm access and drop location.

A practical rule of thumb for fill-dirt is about 1.1 to 1.4 tons per cubic yard; a common conversion we use is roughly 1 cubic yard = 1.2 tons. Because density varies by moisture and composition, ask for a local conversion on your quote and plan to order 5-10% extra to allow for compaction and settling.

For a 10 ft by 30 ft driveway raised 4 inches you will need about 3.7 cubic yards, roughly 4.5 tons. For leveling a 1,000 sq ft yard by 2 inches you will need about 6.2 cubic yards, roughly 7.5 tons. These are estimates; measure your area, use our material calculator, and add 5-10% for settlement.

Moroni experiences seasonal freeze-thaw that can cause heaving and additional settlement, and local clay-rich soils hold water and amplify swelling. To reduce problems, avoid placing frozen material, improve drainage, use well-graded or granular fill where possible, and compact in thin lifts to limit future movement.

For structural areas in Moroni, avoid organic-rich topsoil and use clean, well-graded fill or a compacted road base product; engineers commonly specify compacted lifts of 6 to 8 inches. Compaction targets are typically 90% to 95% of Standard Proctor for driveway bases and building pads. For foundations or significant loads, get a geotechnical recommendation and follow local building department requirements.

Fill-dirt is good for bulk grading and raising low spots but is not a durable finished driving surface. Road base or crusher fines are better choices for a driveway base or surface because they drain and compact better. Use topsoil only for planting areas; if you need both grade and surface, place compacted base material first and top with crusher fines or pavement.

A driveway made only of fill-dirt will settle, rut, and require frequent maintenance in Moroni's climate and is not recommended as a long-term surface. Expect to regrade, add material, and improve drainage every few seasons, especially after freeze-thaw cycles. For longer life, use compacted road base or crusher fines as the finished surface.

Small landscape fills usually do not need permits, but larger fills, changes to drainage, or any work affecting foundations or setbacks may require a permit or engineered fill. Moroni is a small city (population about 1,846), so check with Moroni City Hall or Sanpete County building department before starting major grading to confirm local rules and any inspection requirements.

Before ordering, send photos of the access route and drop area in the Order Notes and mark the intended drop zone with stakes. Confirm truck size and parking space with our team, plan for extra material (5-10%) for settling, and ask about tailgate spreading if you want the driver to spread at their discretion. Schedule deliveries outside of frozen ground conditions when possible to avoid compaction and spreading issues.

Place fill in 6 to 8 inch lifts and compact each lift to the specified density to minimize future settlement. Improve site drainage, avoid high-clay mixes in load-bearing areas, and consider geotextile fabric where soft subgrades exist. For critical areas, hire a soils engineer to recommend materials and compaction targets.

Contact Hello Gravel customer service promptly with photos and a description of the issue so we can work to resolve it. We will coordinate with the supplier and hauler to find a satisfactory solution; see our refund policy for details on eligible claims.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.