Fill Dirt in Plain City, UT

Fill-dirt is inexpensive subsoil used to raise grades, fill low spots, and backfill around foundations or utilities. In Plain City it’s commonly used to level yards, build up building pads, or raise driveway approaches before a finished surface is installed. It is not a planting medium and usually contains little organic matter, so add topsoil when you plan to plant.

Measure the area in square feet and the desired depth in feet, then multiply area by depth and divide by 27 to get cubic yards (area x depth / 27 = cu yd). For estimating tons, a practical rule is 1 cubic yard of fill-dirt equals about 1.3 tons, so multiply cubic yards by 1.3. Example: raising 1,000 sq ft by 3 inches (0.25 ft) is about 9.3 cu yd or roughly 12 tons.

Standard delivery is typically 2+ business days from order placement; next-day delivery is available for orders placed before noon CST for an extra fee. We deliver by dump truck (usually tri-axle) with a minimum order of 3 tons, and you can choose a preferred delivery date at checkout. Drivers may perform tailgate spreading at their discretion if you request it, but that service is not guaranteed.

Costs vary by supplier, distance, and order size, so the best way to get an accurate number is to request a quote through our site or use the material calculator. Keep in mind there is a 3-ton minimum and delivery fees or next-day charges can affect the final price. If budget is a concern, ordering larger loads usually reduces per-ton delivery costs.

Fill-dirt is suitable for raising grades and non-structural backfill, but building pads for structures often require engineered fill and compaction to meet local building codes, so check with Plain City Building Department before use. For driveways, fill-dirt is fine as a base raise, but the finished driving surface should use crusher run, gravel, or pavement rather than loose fill-dirt.

Plain City’s cold winters and freeze-thaw cycles can cause poorly compacted fill to settle or heave if it contains high clay or frost-susceptible material. The area’s semi-arid conditions also mean fill-dirt dries out and shrinks without proper compaction and moisture control during placement. To reduce problems, use proper compaction in layers and provide positive drainage away from structures.

Loose fill can settle several inches over time if not compacted properly; typical uncontrolled settlement can range from a few inches up to 6 inches depending on underlying soils and depth. Minimize settlement by placing fill in lifts (commonly 6-8 inches thick), mechanically compacting each lift, and avoiding overly wet or frozen placement conditions. For critical pads or deep fills, consider engineered fill and a geotechnical recommendation.

Small amounts for routine yard work often do not require a permit, but larger grading, changes to drainage patterns, or fills used for building pads commonly trigger permit or approval requirements. Check with Plain City Planning and Building before starting major earthwork to confirm permit, grading, or stormwater rules and avoid fines or rework.

Clear vegetation and organic topsoil from the placement area, set grade stakes, and plan for positive drainage before delivery. For small jobs you can rent a plate compactor or walk-behind tamper, while larger jobs typically need a roller or sheepsfoot compactor and an excavator or skid steer to spread material. If you’re unsure or the job is large, hire a local contractor who can handle spreading and compaction to meet local requirements.

Yes—adding fill can change how water flows across your lot and may create ponding or increase runoff onto neighboring properties if not graded properly. Prevent issues by maintaining at least a 2% slope away from structures, installing swales or catch basins where needed, and stabilizing exposed slopes with fabric, mulch, or vegetation. If you expect significant changes in flow, consult a local civil or grading professional.

Fill-dirt is subsoil used to raise grade and for structural backfill; it has little organic matter and is not suitable for planting. Topsoil is for lawns and gardens because it supports plants. Crusher run or compactable gravel is better for driveways and paths because it compacts firmly and sheds water, while sand is used where drainage is needed but is not a good load-bearing base by itself.

Enter your Plain City zip code on our site to check availability, choose fill-dirt, and use the material calculator to set quantity; minimum order is 3 tons and you can pick a delivery date during checkout. We accept major credit cards, PayPal, and Apple Pay; after you place the order we coordinate with a local supplier and hauler and confirm delivery details by email or text.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.