Fill Dirt in West Allis, WI

Fill-dirt is generally native soil or screened subsoil used to raise or reshape grade, fill holes, or build non-structural berms. In West Allis you would use fill-dirt for yard leveling, raising lawn areas, or filling trenches, but not as a structural driveway base unless it is compacted and free of organic material. For driveways or patios you should combine or replace fill-dirt with a crushed stone base for proper drainage and load support.

Prices vary with season, supplier, and quantity, but delivered fill-dirt in the West Allis area commonly falls in a broad range and is often lower per ton than engineered base materials. Because local rates change and delivery costs depend on distance and truck size, the most accurate way to know price is to request a Hello Gravel quote for your zip code and desired tonnage. Remember our minimum order is 3 tons and we show delivered pricing up front during checkout.

Hello Gravel partners with local quarries and pit operators throughout southeast Wisconsin and will match your West Allis order to a nearby supplier and hauler. Availability and material quality vary by supplier, so request a quote through our site or call our team to see which suppliers serve your address and to confirm delivery options. We handle scheduling and coordinate the contracted dump truck hauler to deliver on your chosen date.

Hello Gravel minimum order is 3 tons, which is the smallest quantity you can purchase online. Common truck sizes for fill-dirt deliveries to West Allis are tri-axle dump trucks carrying roughly 10 to 14 tons per load; for larger jobs multiple truckloads are used. Drivers will assess access and may limit offloads if the site is tight; request delivery notes at checkout and plan for a 2+ business day standard window or pay for next-day when available.

Fill-dirt is fine soil and not a substitute for a structural stone base; for driveways and patios in West Allis pair fill-dirt with a compacted granular base such as 3/4" crush-and-run or 3/4" minus crushed stone. For sub-grade raising use well-graded fill-dirt with minimal organic content and no large rocks over 2 inches to ensure compaction. For top surfacing, use the appropriate aggregate: crushed stone for structural base and a finer topping like screenings or 3/8" stone for a compacted finish if desired.

West Allis experiences regular freeze-thaw cycles, so fill-dirt with significant fines and poor drainage is prone to frost heave and settlement. Minimize problems by removing organic material, compacting in thin lifts (4-8 inches), providing positive surface drainage, and installing a granular layer or geotextile separation where frost susceptibility is a concern. For areas under pavement, use structural aggregate below the surface and keep frost-susceptible soils away from the active layer.

Permit requirements vary by project type and exact location in West Allis, so check with the City of West Allis Building Inspection and Public Works before starting significant grading or changing driveway profiles. Small yard top-ups usually do not require a permit, but regrading that affects drainage, right-of-way, or stormwater may trigger permits or an engineering review. When in doubt, contact the city and include permit notes in your project planning before ordering material.

For general fill-dirt use aiming for 90% to 95% of standard compaction is common for engineered fills, while non-structural yard fill can often be compacted to lower numbers; follow your project or municipal spec. Use a plate compactor for thin lifts and a vibratory roller or tamping equipment for larger areas; compact in lifts of 4 to 8 inches. Contractor labor and equipment costs in the Milwaukee metro vary; expect labor plus equipment to run from modest hourly rates for small jobs to several hundred dollars per day for machine work, so get local contractor estimates through Hello Gravel or a site visit for an accurate number.

Calculate volume in cubic yards first: area (ft2) x depth (ft) / 27 = cubic yards. Convert to tons by multiplying cubic yards by the local material weight (fill-dirt commonly ≈1.0 to 1.3 tons per cubic yard depending on moisture). Example: a 12 ft by 100 ft driveway raised 6 inches is 12 x 100 x 0.5 / 27 = 22.2 cubic yards, which is about 22 to 29 tons of fill-dirt; use our online calculator or request a quote to get a precise delivered tonnage for your West Allis address.

No, fill-dirt on its own is not a good structural base for a driveway. Limestone screenings or recycled concrete provide a stable, well-draining, and compactable aggregate base that resists rutting and frost heave better than fill-dirt; use those materials for the structural layers and reserve fill-dirt for subgrade raising or landscaping. For best results in West Allis, place a compacted aggregate base beneath any paved or frequently driven surfaces and keep fill-dirt capped with stable material.

Fill-dirt used for yard grading or low-load areas generally settles over the first year, so expect to add topsoil and regrade low spots after settlement. If used improperly under driveways, expect rutting, potholing, and more frequent repairs; properly constructed bases with appropriate aggregates will last much longer. Lifespan depends on installation quality and drainage—well-compacted subgrade with good drainage can perform for many years, while loose or organic-filled areas may need touch-ups within a season.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.