Fill Dirt in Power Ranch, AZ

Prices vary by supplier, season, and moisture content. Hello Gravel lists local per-ton pricing during checkout (minimum order 3 tons) and charges depend on weight rather than a fixed 'load' size; a full tri-axle truck in the Phoenix/Power Ranch area typically carries about 10-12 cubic yards (roughly 13-16 tons depending on moisture and compaction). Use our material calculator or get a quote to see exact cost for the tonnage you need.

Generally yes — basic fill-dirt is one of the least expensive bulk materials because it is unprocessed soil used for grading and raising elevations. Decorative gravels and crushed rock are processed, washed, and sized, so they usually cost more per ton and per square foot. Local pricing can vary, so compare per-ton or per-cubic-yard prices in checkout for a direct comparison.

Truck capacity depends on the vehicle and material density; in the Power Ranch area a tri-axle dump often holds about 10-12 cubic yards, which translates to roughly 13-16 tons for typical fill-dirt. For ordering we recommend working in tons (our checkout uses tons) and contacting our team if you need a specific truck-size estimate or multiple truck deliveries. Remember moisture and compaction change weight, so ton estimates are approximate.

That depends on the driveway width and desired depth. For a 20 ft long by 10 ft wide driveway at 4 inches deep you need about 2.47 cubic yards (about 3.2 tons using a 1.3 tons/yd3 estimate). If your driveway is wider or you need more build-up, recalculate using length x width x depth then convert to cubic yards and to tons, or use our calculator for an exact quote.

Coverage depends on depth. At 1 inch depth 1,000 sq ft needs about 3.09 cubic yards (about 4.0 tons); at 2 inches it needs about 6.17 cubic yards (about 8.0 tons); at 4 inches it needs about 12.35 cubic yards (about 16.0 tons). These use a conversion of roughly 1.3 tons per cubic yard — actual weight varies with moisture and compaction, so treat these as estimates.

Yes for small grade adjustments and to raise low spots, but do not use raw fill-dirt as the final top layer if you plan to grow grass or plants — add 4-6 inches of quality topsoil over compacted fill for planting. Properly place fill in 6-8 inch lifts and compact each lift to avoid future settling; larger regrades or structural changes may require a geotechnical recommendation. Also consider drainage in the desert climate and avoid creating low spots that hold water.

No — compacted fill-dirt alone is not a substitute for concrete for structural or load-bearing surfaces. For simple, low-cost bases you can use compacted crusher fines or crushed rock over a geotextile, but sheds, patios, and driveways typically need engineered bases or concrete per local code. If you are considering a nonstructural low-cost option in Power Ranch, ask our team for material suggestions and check local building department requirements.

Yes — fill used next to foundations, under slabs, or in utility trenches often must meet compacted fill specifications or be engineered; standard fill-dirt we deliver is suitable for general grading and landscaping but may not meet structural requirements. For foundation work get a geotechnical or structural recommendation and tell us at ordering so we can connect you to suppliers who provide engineered or compactable fill. We also recommend notifying your contractor and local permitting authority before placing fill near structures.

Hello Gravel requires a minimum order of 3 tons and delivers by dump truck (typically tri-axle) with standard delivery at 2+ business days and a next-day option if ordered before noon CST (fees may apply). Tailgate spreading is available at the driver's discretion — request it at checkout but know it is not guaranteed. Check your zip code for service availability and contact our team if you have site access issues, overhead lines, or special placement instructions.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.