Gravel in San Tan Valley, AZ

Prices vary by type and supplier, but delivered gravel in San Tan Valley typically runs about $30 to $60 per ton for common landscape and driveway aggregates. Specialty materials like decorative boulders, colored rock, or washed pea gravel are on the higher end. Final price depends on product, delivery distance, and the minimum order (Hello Gravel minimum is 3 tons).

Decomposed granite and pit-run or crushed base material are usually the most affordable options in the San Tan Valley area. These materials work well for paths, informal yards, and as a base under decorative rock. Because we source regionally, local availability often makes these options even cheaper than imported decorative stones.

Labor rates vary, but expect landscapers or crews to charge roughly $1.50 to $4.00 per square foot for prepping and installing gravel, depending on site conditions and complexity. Simple spreading over an existing surface is at the low end; jobs that require grading, edging, or weed fabric are more expensive. Always get a written estimate that lists material, prep, and labor separately.

Gravel is a naturally occurring, rounded rock collected from riverbeds and quarries; crushed stone is angular and mechanically broken from larger rock. Crushed stone locks together better for driveways and base layers, while gravel has a looser, more natural look for decorative areas. In San Tan Valley, crushed granite and crushed stone base are common for driveways because they compact and drain well.

The cost for a typical tri-axle dump truck load (about 10 to 12 cubic yards) depends on the material but commonly ranges from about $300 to $900 delivered in the San Tan Valley area. The final price depends on material type, weight, and whether spreading or difficult access is involved. Hello Gravel quotes delivered pricing up front and requires a minimum order of 3 tons.

Coverage depends on truck size and desired depth. A 10-cubic-yard load will cover roughly 3,240 sq ft at 1 inch thick, about 1,080 sq ft at 3 inches, and about 810 sq ft at 4 inches. For driveways we commonly recommend 3 to 4 inches total depth (often with a compacted base), so a 10-cy load typically covers about 800 to 1,200 sq ft in San Tan Valley projects.

A 10-yard load price varies by material but typically falls between $300 and $900 delivered in San Tan Valley, depending on whether it is base rock, crushed granite, or decorative material. Heavier or specialty materials cost more because of weight and sourcing. Hello Gravel provides delivered quotes so you can see the total before you buy.

One cubic yard is a 3 ft by 3 ft by 3 ft cube and usually fits in the bed of a small pickup. Visually it is about the size of a small washing machine stacked to the same height, or a pile roughly the height of a person but compacted. One cubic yard of gravel weighs roughly 1.2 to 1.5 tons depending on rock type and moisture.

One ton of typical gravel equals roughly 0.7 to 0.8 cubic yards, so coverage depends on depth: at 1 inch thick it covers about 200 to 250 sq ft, at 3 inches about 60 to 70 sq ft, and at 4 inches about 45 to 55 sq ft. These are approximate; actual coverage varies with stone size and compaction, so order a little extra for waste and settling.

You might find free rock from local construction or utility projects, community giveaways, or online classifieds where people offer surplus materials. Check local material recyclers, municipal transfer stations, or neighbor groups, but always confirm permission before taking materials. Keep in mind free material may be mixed, dirty, or unevenly sized and could require extra screening or hauling effort.

Amount depends on depth: for 1,000 sq ft at 2 inches you need about 6.2 cubic yards (roughly 8.5 to 9 tons); at 3 inches about 9.3 cubic yards (about 12.5 tons). Using local pricing, multiply the tonnage by your per-ton price to estimate material cost and include delivery and spreading if needed. We recommend ordering 5-10% extra to account for compaction and edging losses.

A common prep is to grade and compact the soil, install edging, and lay a permeable landscape fabric or geotextile over the surface to reduce weed growth while allowing drainage. For driveways or high-traffic areas, install a compacted base layer of crusher fines or road base first before the top gravel. In desert climates like San Tan Valley, proper grading to manage runoff and using durable edge restraints helps keep gravel from migrating.

Costs depend on width, depth, and prep. For a single-car 20 ft long driveway at 10 ft wide (200 sq ft) with a 3-inch gravel depth you need about 2.0 cubic yards (about 2.7 to 3 tons), so material would likely be under $200 to $250; installed prices including grading, edging, and labor commonly range from $300 to $1,000. Larger, heavier-use driveways or jobs requiring base rock and compaction will be at the higher end.

Regular gravel does not harden like concrete, but there are stabilized options that bind the material with resin, polymer, or cement to create a more solid surface. Products labeled 'stabilized gravel' or resin-bound aggregate provide a firm, smooth finish while remaining permeable. These systems are more expensive than loose gravel but are a good option in San Tan Valley where dust control and walking comfort are priorities.

Avoid pea gravel in steep slopes, high-traffic driveways, or areas where it can easily migrate because its round shape does not lock together. It is also uncomfortable under bare feet and can be difficult to mow around or use under outdoor furniture. In San Tan Valley's windy, dusty conditions, loose pea gravel may produce more tracking and require edging or stabilization to stay put.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.