Fill Dirt in Riverside, KS

Delivered fill-dirt in the Riverside area usually runs in a broad range because of source, moisture, and haul distance. Expect roughly $10 to $30 per ton delivered for common local fill-dirt materials, with many orders landing around $15 to $25 per ton; prices climb during high-demand seasons or for long hauls. Contact our team for a specific quote for your zip code.

Local suppliers include landscape supply yards, construction dirt yards, and regional quarries that sell bulk fill-dirt; Hello Gravel connects you to trusted local vendors in the Kansas metro. Our platform minimum is 3 tons, but some suppliers or remote deliveries may prefer full truckloads (typically 10 to 12 tons) to keep delivery affordable. If you need less than a truckload, ask about shared loads or smaller delivery options when you order.

Fill-dirt is fine for raising grade or building subgrade, but it is not a recommended wearing surface. Place fill-dirt in 4- to 6-inch lifts (thin layers) and compact each lift with a plate compactor or roller until firm to minimize settlement. For a driveway, install a 4- to 6-inch layer of road base or crushed stone on top of the compacted fill for proper load-bearing and durability.

In Riverside and the greater Kansas area, freeze-thaw can cause poorly compacted or clay-heavy fill to heave and settle. Proper compaction, good drainage, and avoiding high-clay material near the surface reduce freeze-thaw movement. For long-term durability, place a granular base layer (road base or crushed rock) over compacted fill to protect the subgrade from moisture and frost action.

A 50 x 50 ft area at 6 inches equals about 1,250 cubic feet, or about 46.3 cubic yards. Using a common estimate of roughly 1.2 tons per cubic yard for fill-dirt, you would need about 55 to 57 tons (round to 56 tons) delivered. This is an estimate; exact tons depend on moisture content and compaction, so order a little extra for settlement and grading waste.

Fill-dirt is best for raising grade and backfilling; it is not ideal as a final driveway surface. Crushed limestone gives a good finished driving surface in Kansas and looks clean, while road base is engineered for compaction and heavy loads and is the preferred structural layer under a driveway. Most local contractors use compacted fill-dirt for subgrade, then add road base and a crushed limestone or asphalt wearing layer on top.

You may need permits or erosion-control plans for large fills or grading work in Riverside, and county rules may apply too (Riverside is in the Kansas City metro area and subject to local zoning and floodplain rules). Because thresholds vary by project size and location, check Riverside City Hall or Wyandotte County planning before large deliveries—especially if you are near creeks, floodplains, or public right-of-way. If you are unsure, contact our team and we can help direct you to the right local office.

Standard delivery through Hello Gravel is typically 2+ business days, and next-day delivery is available for orders placed before noon CST for an extra fee. Lead times and prices can tighten in spring and early summer when landscaping and construction demand peaks, and again in fall; expect longer waits and higher rates during those periods. We recommend scheduling earlier for large jobs or peak-season needs.

Compacted fill-dirt used as a subgrade can last many years if properly installed and protected by a granular wearing layer. Bare fill-dirt surfaces or temporary access roads will rut, erode, and settle and typically need regrading, infill, and reseeding within a season or two. Regular drainage management, periodic re-compaction, and topping with road base or crushed stone extend the life and reduce maintenance.

Contractors commonly use fill-dirt to raise low spots, adjust grades, and build subgrades because it is cost-effective and stable when compacted. For planting, lawns, and gardens you should use quality topsoil rather than fill-dirt because topsoil contains organic matter needed for plants. For drainage improvements, contractors often combine compacted fill-dirt with engineered solutions (swales, gravel channels, and perforated drain pipe) rather than relying on fill-dirt alone.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.