Fill Dirt in Cove, UT

Typical delivered prices for loose fill-dirt in small, rural West Utah towns like Cove are approximate and vary by supplier, distance, quantity, and moisture. Expect roughly $12 to $30 per ton, which is about $15 to $36 per cubic yard (using ~1.2 tons per cubic yard as a general guide). Prices can be higher for small orders, long hauls, or special source material; Hello Gravel minimums and delivery fees may apply.

Hello Gravel works with local haulers that typically deliver by tri-axle dump truck and require a minimum order of 3 tons. Standard delivery is 2+ business days with a next-day option if ordered before noon CST (extra fee), and drivers may offer tailgate spreading at their discretion—request it at checkout but expect the driver to assess safety and feasibility on arrival.

Fill-dirt itself is intended to add volume and raise grades, but its performance through freeze-thaw depends on composition, compaction, and drainage. In West Utah's semi-arid climate with occasional freeze-thaw, compacting in lifts, providing positive drainage away from structures, and avoiding high-clay “expansive” soils or mixing in coarse material for drainage will reduce frost heave risk.

Contractors calculate cubic yards by multiplying the area (sq ft) by the depth (ft) and dividing by 27 (cu ft per cu yd). Then they add 10-25% extra for compaction and settlement and convert to tons using a factor like 1.2–1.4 tons per cubic yard depending on moisture and soil type. For example: a 1,000 sq ft area raised 4 inches needs about 12.3 cu yd; add 15% for settling = ~14.1 cu yd, which is roughly 17–20 tons.

Fill-dirt is loose soil used to raise grades and fill low spots but is not ideal as a finished driveway surface. Road base is processed aggregate with fines that compacts well and forms a stable subbase; crusher run (crushed rock with fines) is denser and commonly used for finished gravel driveways and drive surfaces. For a durable driveway in Cove, use road base or crusher run for the driving surface and reserve fill-dirt for grade changes or under-engineered areas with proper compaction and a structural base above it.

Permit requirements are set by local city, county, and health departments; Cove residents should check with their county building department and local health department for septic pad rules. Some jurisdictions require source documentation, soil testing, or inspection for imported fill used under structures or septic systems, so confirm local rules before ordering and save supplier manifests for inspections.

For residential work in Cove, contractors commonly place fill in 6–8 inch lifts and compact each lift to a target of about 90–95% of standard/modified Proctor (or as required by local code or an engineer). Proper moisture control, incremental lifts, and the right compaction equipment (plate compactor for small areas, roller for larger areas) are key; consider geotextile under fill on weak subgrades to improve stability.

Costs vary by access, depth, and equipment needed, but small yard-raising projects often add several hundred to a couple thousand dollars for spreading and compaction. Expect the added labor/equipment portion to range widely—on accessible sites it may be a few hundred dollars, while tight-access or large pad jobs requiring excavation, testing, or rental equipment can run into the low thousands; get an on-site quote for an accurate estimate.

Provide clear access instructions, preferred dump location, any gate codes, and note low-hanging wires, steep driveways, or narrow approaches before scheduling delivery. Tri-axle trucks need enough room to maneuver and space to safely dump; if you want tailgate spreading requested, add it to Order Notes but expect the driver to confirm feasibility on arrival.

For lawns or landscaping, once the fill is placed, compacted to the final grade, and covered with a suitable topsoil layer or amended surface, you can seed or plant right away. For structural work, do not build until the fill has been placed and compacted to engineered specifications and any required inspections or compaction testing are complete; that timeline may be same-day for engineered compaction or longer if more depth or testing is required.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.