Fill Dirt in Harrisville, UT

Typical delivered prices for fill-dirt in the Harrisville/West Utah area run roughly $12 to $35 per ton, depending on whether the material is screened and how far it must be hauled. Hello Gravel shows transparent pricing at checkout and many areas have free or low-cost delivery; next-day delivery and tailgate spreading may add fees. Minimum orders are usually 3 tons.

Homeowners in Harrisville use fill-dirt for grading low spots in yards, raising lawn or garden beds, leveling under sheds or patios, and filling trenches or utility corridors. It is best for non-structural fill where good compaction is needed but engineered structural fill is not required.

Harrisville sees seasonal freeze-thaw cycles and generally low annual precipitation, so poor drainage or organic-rich fill can heave or settle more over time. Use clean, compactable fill-dirt, ensure positive drainage away from foundations, and compact in lifts to reduce future movement.

A good rule of thumb: 1 cubic yard = 27 cubic feet and fill-dirt typically weighs about 1.2 tons per cubic yard when compacted. Example estimates: to raise 1,000 sq ft by 3 inches you need about 9.3 cubic yards (≈11 tons); raising the same area by 6 inches is ≈18–22 tons. For small building pads, a 100 sq ft area raised 12 inches is about 3.7 cubic yards (≈4.5 tons). Adjust for compaction loss and order a little extra (5-10%).

Screened or clean fill-dirt has most rocks, roots, and debris removed and is more uniform, making it easier to compact and finish; it costs more. Standard fill-dirt may include small rocks and organic material and is fine for rough grading but not recommended under structures or where finish surface quality matters.

For simple yard grading or landscaping in Harrisville you typically do not need a permit, but building pads, foundation fills, and structural work often require permits and may need compaction testing or engineered fill per Weber County/Harrisville building rules. Always check with the Harrisville City Building Department or Weber County before placing large fills under structures or near property lines.

Choose fill-dirt for general grading and non-structural fills where affordable, compactable soil is acceptable. Use clean fill when you need fewer organics and better compaction, 3/4" base rock for driveways and drainage where load-bearing and drainage are required, and engineered fill (specified soils and compaction tests) for foundations, retaining walls, or other structural applications.

Contractor pricing varies, but expect labor and equipment for spreading and grading to run roughly $50 to $150 per hour for a skid steer or small crew, plus compacting equipment rental or contractor charges that can add $200 to $800 depending on project size. Some contractors price spreading/compaction per cubic yard or as a flat job rate; get multiple quotes and confirm whether Hello Gravel delivery includes tailgate spread (driver discretion) or if you need a separate contractor.

Measure the area in square feet, decide the desired depth in inches, then use this formula: cubic yards = (area ft2 * depth ft) / 27. Multiply cubic yards by ~1.2 to estimate tons for compacted fill-dirt, then add 5-10% extra for compaction and waste. Use Hello Gravel’s material calculator or contact our team for help with project-specific estimates.

Yes. Because Hello Gravel sources regionally, color and texture will reflect local geology in West Utah; materials may contain small caliche or gravel depending on the supplier. Also plan deliveries around seasonal ground conditions, verify access for dump trucks on narrow or steep lots, and check local permit rules if you are working near utilities or building foundations.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.