Fill Dirt in North Salt Lake, UT

Delivered fill-dirt prices in North Salt Lake commonly range by volume and source, but a typical ballpark is about $12 to $35 per ton delivered depending on haul distance, truck access, and moisture. Hello Gravel shows exact local pricing for your ZIP code and has a 3-ton minimum; request a quote to see current rates and any delivery fees.

Hello Gravel partners with local quarries, landscape supply yards, and aggregate haulers that service the North Salt Lake area and will show available suppliers during checkout. For installation, local landscape contractors and grading companies in Salt Lake County handle placement and compaction; ask Hello Gravel for supplier names and contractor referrals in your zip code.

Yes. North Salt Lake’s cold winters and spring runoff can leave soils wet or frozen, so the best months for placing and compacting fill-dirt are typically late spring through early fall. Avoid placing large fills on saturated or frozen ground, and schedule deliveries during drier periods to ensure proper compaction and reduce settlement risk.

For most residential work, use clean, non-organic fill placed in 6- to 8-inch lifts and compacted to the project’s specified density; contractors often aim for 90% to 95% of Standard/Modified Proctor depending on local code and soil type. For driveways, a compacted fill-dirt subgrade topped with 4–6 inches of crushed rock provides better drainage; for building pads always follow a geotechnical engineer or city requirements for gradation and compaction.

Use this quick formula: cubic yards = (square feet × depth in inches) / 324. For 1,000 sq ft at 6 inches that equals about 18.5 cubic yards, which converts to roughly 22–28 tons of fill-dirt in North Salt Lake depending on moisture and material density (we recommend ordering a small extra allowance for compaction and settlement).

Large grading or fill projects may trigger local permits or inspections, especially if they change site drainage or exceed volume thresholds, so contact the North Salt Lake Building Department or Salt Lake County Planning before major fills. For structural fills or near foundations, the city often requires engineered plans and geotechnical testing—hire a geotech or check city permitting guidance early in your project.

Areas near the Great Salt Lake can have higher salt or alkali levels and a higher water table, which can affect soil chemistry and drainage; untreated fill-dirt with fines or salts may harm plantings or corrode buried materials. For properties near the lake, request low-salt or washed fill and plan for extra drainage measures (underdrains, slope grading) and consider soil testing to confirm suitability.

Contractors typically place fill-dirt in 6–8 inch lifts and compact each lift with appropriate equipment—plate compactors for small areas and vibratory rollers or rammers for larger jobs—with roughly 4–8 passes per lift depending on soil type. Production rates vary by access and equipment, but a small crew might place and compact 20–100 cubic yards per day; expect tri-axle trucks (12–18 tons) to unload every 15–45 minutes during active placement.

Fill-dirt is usually the lowest-cost option per ton and fine for non-structural grade builds or raising lawn areas, but it can settle and retain moisture, leading to future grading or drainage work. Crushed rock or engineered fill costs more upfront but gives better drainage, load-bearing capacity, and long-term stability—so for driveways, pads, or areas near the Great Salt Lake, engineered fill or rock is often the smarter long-term choice.

Most suppliers and haulers offer delivery quality terms at the time of drop off (quantity and visible condition) but rarely provide long-term warranties on natural fill-dirt because settlement and performance depend on placement and compaction. Hello Gravel recommends inspecting material at delivery, documenting any issues, and contacting customer service promptly so we can work with the supplier on resolution per our issue process.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellograve3dev.wpengine.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellograve3dev.wpengine.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellograve3dev.wpengine.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.